高强混凝土超筋受扭构件有效壁厚的研究

通过理论分析和实验验证，对高强混凝土超筋受扭构件有效壁厚计算提出了具体的确定方法，供有关人员设计时参考。     

多支承矩形厚板固有横振频率的特征方程

采用Ｌａｐｌａｃｅ变换研究了两对边简支多支承矩形厚板的固有横振，并给出了其振型函数及频率的特征方程。     

自动扣压联网法及其应用

主要论述自动扣压联网法的原理及其铺联网机构与液压支架配套使用来实现厚煤层分层开采金属网假顶的自动铺设和联结。     

浅谈宝钢宽厚板工程磨辊间设计的有关问题

介绍宝钢宽厚板轧机工程概况及磨辊间主要特点，阐述了宽厚板轧机磨辊间设计中应注意的问题。     

"3-Section" Technology of Full-Dimension Mining in Flat Thick-Seam

To raise coal recovery ratio and solve the key problem of full-dimension mining, a new "3-section" technology of full-dimension mining is put forward in flat thick-seam according to the theory and mining practice. This technology is proved to be rational and feasible in rodway layout system of stagger arrangement.     

掺硼CVD金刚石的电加工表面分析

金刚石具有一系列独特的力学、热学、声学、电学、光学和化学性能，在高科技领域具有广阔的应用前景。普通CVD金刚石膜是高度绝缘的，不能采用如电火花等加工导电聚晶金刚石(PCD)的方法和设备对其进行加工。本文通过掺硼实现了金刚石膜的导电。开展了电火花成型和线切割的实验研究，并通过SEM、Raman分析和粗糙度测量对加工后的表面进行了分析。     

Reduction of defects and improvement in the performance of blue phosphor for thick‐dielectric electroluminescent displays using Color‐by‐Blue

Abstract— Defect‐free large‐area inorganic thick‐dielectric EL (TDEL) displays using Color by Blue (CBB) technology have been successfully developed. We have achieved the world's highest blue‐phosphor luminance of 900 cd/m² for a single‐pixel device by using CBB and by optimizing the e‐beam gun configuration and the flow rate of H₂S in the vacuum chamber. By analyzing the defects on panels with triple‐pattern phosphors and CBB panels, we also found that the number of defects on CBB panels can be drastically reduced compared with those on triple‐pattern panels. The defect‐free 17‐in. VGA CBB panels show better characteristics, a high peak luminance of 600 cd/m² and a high contrast ratio of 1000:1, compared with those of triple‐pattern panels.     

Applications of medium-voltage STEM for the 3-D study of organelles within very thick sections

Scanning transmission electron microscopy at 300 kV enables the visualization of nucleolar silver-stained structures within thick sections (3–8 μm) of Epon-embedded cells at high tilt angles (–50°; + 50°). Thick sections coated with gold particles were used to determine the best conditions for obtaining images with high contrast and good resolution. For a 6-μm-thick section the values of thinning and shrinkage under the beam are 35 to 10%, respectively. At the electron density used in these experiments (100e^—/Å₂/s) it is estimated that these modifications of the section stabilized in less than 10 min. The broadening of the beam through the section was measured and calculations indicated that the subsequent resolution reached 100 nm for objects localized near the lower side of 4-μm-thick sections with a spot-size of 5·6 nm. Comparing the same biological samples, viewed alternately in CTEM and STEM, demonstrated that images obtained in STEM have a better resolution and contrast for sections thicker than 3 μm. Therefore, the visualization of densely stained structures, observed through very thick sections in the STEM mode, will be very useful in the near future for microtomographic reconstruction of cellular organelles.     

大牛地气田大12-大66井区沉积微相与储层产能关系

以大牛地气田大12—大66井区为研究对象,基于物质供给和沉积水动力条件、河道结构与特征,探讨了沉积微相纵向结构与产能分布之间的成因关系,沉积微相横向结构与产能分布之间的内在关系。研究表明,物质供给和沉积水动力条件的组合关系是影响沉积微相纵向产能分布规律,其中物质供给充分、稳定的强水动力条件下,主要为中高产气层;分流河道微相中心位置,测试产能相对稳定,中高产气层分布比较多。分流河道微相边部,测试产能有不稳定的特点。两个强水动力沉积的河道交汇处,是中、高产气层的密集发育区。另外,曲流化的固定河道,因复杂化而形状变化大、难钻遇,但潜力大。不稳定河道,储层整体产能低,但强水动力沉积区仍具挖潜价值。研究结果与大12—大66井区生产测试结果吻合。     

Non-Resonant Structure Design of Catenary Transformer in Ultrasonic Gear Honing

To solve the design problem of transformer composed of non-resonant structure in ultrasonic gear-honing,force coupling conditions for moderately thick annular plate (MTAP) and catenary horn are propose...